(800) 640-1320

Scientific Imaging, Inc.

Imaging Solutions for Science and Industry

Home > Products > CMOS Camera Selection > 24.5MP Sony Pregius Gen4 Imager Based Camera
pl_4

10GigE Configuration

24.5MP Sony Pregius Gen4 Imager Based Camera

Features

  • Imager Series: Sony IMX530
  • 24.5 MP: 5320 x 4600 at up to 47 f/sec
  • Global Shutter
  • 1.2″ Image Sensor Optical Format
  • Monochrome or Color
  • Pixel Size: 2.74μm x 2.74μm
  • Excellent Photonic Characteristics
  • Supports Hardware and Software Triggering
  • Host Interface and Power: 10GigE
  • C-Mount compatible: add a Camera Lens or a Zoomable or Fixed Microscope/Macroscope
  • Includes Software for Camera Control and Image Acquisition
  • Supported by a Full-featured SDK
  • 3rd Party Software support: LabVIEW, Matlab, Micro-Manager

Typical Applications:

  • Microscopy: Brightfield & Fluorescence
  • Materials Sciences and Physical Sciences
  • Inspection, Metrology and Quality Control

Product Documents

Camera Docs

+ My Quote

This series of cameras is based on the IMX530 series of large FOV 24.5MPix image sensors from Sony’s Pregius Gen4 line of CMOS Sensors. The data throughput from these large FOV image sensors exceeds the bandwidth of interfaces such as USB3.0. This series of cameras matches the impressive specifications of the imager with the high bandwidth 10GigE interface, delivering uncompromising performance.

The IMX530 image sensors combine high sensitivity and a low read noise and are therefore a great choice for imaging under a wide range of conditions, including low-light imaging applications such as fluorescence microscopy. Sony’s Global Shutter technology ensures that all pixels begin and end exposure simultaneously. This is particularly useful in imaging conditions in which the field of view changes rapidly, either due to fast motion or due to rapid changes in light intensity.

All cameras in this series are bundled with Pixelink Capture, a free, real-time, interactive multi-camera software application.

Host Interface: 10GigE

Color Space Options:

  • Monochrome
  • RGB Color

Configuration Options:

  • Enclosed: this is the standard configuration, in which the camera electronics are enclosed in an enclosure.
  • Board Level: in this configuration, a c-mount adapter is installed, but the camera enclosure is omitted. The user accepts all responsibilities related to using exposed, unshielded electronic circuits.

Note: the Sony IMX530 imager that is used in this camera series is also available in an Embedded Kit for nVIDIA.

Camera Series PL-X9524MG PL-X9524CG
CMOS Sensor Technology Sony Pregius Gen4
Image Sensor series IMX530
Spectral Option Monochrome RGB
#pixels (MP) 24.5
#pixels (H x V) 5320 x 4600
Max. Frame Rate (fps) 43
Pixel Size (µm) 2.74
Shutter Type Global
Imager Dimensions: H x V (mm) 14.6 x 12.6
Diagonal (mm) 19.30
(*) Peak QE (% @ λ nm) 74% @ 480nm See RGB Graph
(*) Read Noise (e-) 2.1
(*) Full Well Capacity (Ke-) 9.3
(*) Dark Current at 25°C (e-/p/s) 0.85
Bit Depth 12
Interface 10GigE
TE Cooled No
Lens Mount TFL and C-Mount
Optical Format (for lens selection) 4/3" > 1.2" > 1.1"
(*) these are for reference only, and are not specifications provided by the manufacturer. Please contact us to discuss the photonics requirements of your application.
  • Use your mouse to read QE data at wavelengths of interest.
  • Right-click and drag to zoom-in along the X-axis to expand the view for a desired range of wavelength.
  • To pan left or right within a zoomed-in view, hold down the Shift key and use your mouse.
  • To revert from a zoomed-in view to a normal view, click on the “Reset zoom” button that is displayed at the top-RHS of the graph.

A 1mm thick BK7 clear glass window is installed on monochrome camera models manufactured by Pixelink: this is in addition to the glass faceplate on the image sensor itself. The transmittance of the clear glass window between 365nm – 1100nm is greater than 99.3%, but it falls sharply below 365nm. The QE values shown below 365nm are not meant to indicate that standard versions of these monochrome cameras have spectral responsivity outside the transmittance range of the glass window.

The glass faceplate may cause thin-film interference fringe patterns in coherent-light imaging applications, such as laser beam profiling or interferometry. In such applications all glass (including the glass faceplate on the image sensor) must be removed. Please contact us with these special requests.

  • Use your mouse to read QE data at wavelengths of interest.
  • Right-click and drag to zoom-in along the X-axis to expand the view for a desired range of wavelength.
  • To pan left or right within a zoomed-in view, hold down the Shift key and use your mouse.
  • To revert from a zoomed-in view to a normal view, click on the “Reset zoom” button that is displayed at the top-RHS of the graph.

An NIR-blocking filter is installed on RGB color camera models. These filters transmit light between 380nm – 648nm, and significantly attenuate light that is outside that range. The need for an NIR-blocking filter in color cameras is explained in our Knowledge Base article titled Quantum Efficiency and Spectral Responsivity. For specifications of the NIR-blocking filter that installed on RGB color camera models from Pixelink, please refer to the article titled Spectrum of IR cut glass used by Pixelink.

All QE values on this website are the best estimates available from various sources, and not necessarily from the manufacturer of the specific image sensor or from the manufacturer of the cameras in our Product Showcase. They represent the best estimates for the imagers by themselves, with the caveat that glass and other optics in the imaging path can significantly impact the spectral sensitivity of an imaging system.

As described on our Knowledge Base article on this subject, these values exist in a range. Therefore no absolute precision is implied, even when QE values are shown to two decimal places! These values and graphs are intended to be used for reference can be use for making useful comparisons between cameras. They are not intended to be a specification or a performance guarantee.

Using the method described in our Knowledge Base Article titled “How Diffraction Limits the Optical Resolution of a Microscope” one can estimate the performance of this camera when used in a microscope with commercially available microscope objectives. In the table below, it is assumed that the microscope is comprised of the objective and a tube lens with the correct focal length for the objective such that the nominal optical magnification of the microscope is the value that is specified for the objective.

Camera Parameters
Optical Format #Megapixels #H pixels #V pixels Pixel size (μm) H size (mm) V size (mm) Diagonal (mm)
1.1" < 1.2" format < 4/3" 24.5MP 5320 4600 2.74 14.58 12.6 19.27
Commercially Available Objectives
Objective: Mag/NA 1X\0.03NA 2X\0.1NA 4X\0.13NA 10X\0.26NA 20X\0.5NA 40X\0.75NA 60X\0.85NA 100X\1.4NA
Min. feature size (um) 11.18 3.36 2.58 1.29 0.67 0.45 0.39 0.24
Max pix size (um) 5.59 3.36 5.16 6.45 6.70 9.00 11.70 12.00
FN (mm) 22 22 22 22 22 22 22 22
WD (mm) 8 56.3 17.2 16 2.1 16 0.66 0.31-0.4
NA 0.03 0.1 0.13 0.26 0.5 0.75 0.85 1.4
Magnification 1 2 4 10 20 40 60 100
Estimated Performance of Camera and Objective Combinations
(*) Limiting Resolution (µm) 11.18 3.36 2.58 1.29 0.67 0.45 0.39 0.24
Vignetting? No No No No No No No No
FOV (H x V) mm 14.58 x 12.6 7.29 x 6.3 3.64 x 3.15 1.46 x 1.26 0.73 x 0.63 0.36 x 0.32 0.24 x 0.21 0.15 x 0.13
FOV (diagonal) mm 19.27 9.64 4.82 1.93 0.96 0.48 0.32 0.19
Please contact our imaging experts for assistance in selecting a camera & objective combination that fulfils your FOV & resolution requirements at application-specific wavelengths.
1) The minimum feature size is estimated using the Rayleigh Criteria at λ = 550nm; it can be re-calculated for other wavelengths. R = 1.22*λ/(2NA)
2) The maximum pixel size is estimated by applying the Nyquist criteria to the minimum feature size as it appears on the imager plane. Maximum pixel size = R*magnification/2
3) Camera and Objective combinations which meet the Nyquist criteria and are therefore diffraction limited are indicated by showing the Limiting Resolution in green font. (*)
4) Values for Working Distance (WD) and Field Number (FN) are shown for reference only. Actual values may vary.
5) Vignetting, a darkening of the image at the corners, may be observed if the Imager Diagonal is larger than the Field Number of the Objective.

Camera P/N [Image Sensor], Interface 1.1" < 1.2" format <4/3" #H pixels #V pixels Pixel size (μm) H size (mm) V size (mm) Diagonal (mm)
PL-X9524 [Sony IMX530], 10GigE 24.5MP@47f/sec 5320 4600 2.74 14.58 12.60 19.27
In applications that require the best achievable optical resolution, it is desirable to use a lens with an optical resolution ≥ 182 lp/mm for an image sensor with a pixel size of 2.74μm. This will ensure that the optical resolution of the camera & lens combination is Nyquist-limited by the pixel-size of the camera, and not by the quality of the lens.

This camera has an optical format of 1.2″, corresponding to an imager diagonal of 19.3mm. Lenses of 4/3″ optical format (indicated in light-green on the table below) can be used with this camera without vignetting, since their projected ~21.6mm diameter image will slightly overfill the image sensor. Also included in the following table are lenses of 1.1″ optical format, which satisfy the Nyquist requirement and project an image that is nominally 17.6mm. Many lenses are designed such that they exceed the nominal image diameter for their optical format. However, there may be some vignetting at the corners of the image. For more on optical formats and vignetting, please check out our Knowledge Base article titled Camera Lens Fundamentals.

Lenses with lower than the the limiting optical resolution of 182 lp/mm do not meet the Nyquist criteria, as is the case of the 4/3″ compatible lenses shown in the table below. These lenses have a high optical resolution of 160 lp/mm (center), but the 2.74μm pixels of this camera have a higher effective optical resolution than the lenses. The limiting resolution for the camera and lens system (shown in the table below as the minimum resolvable feature) is therefore set by the lens, and not the camera. Even though the lenses shown do not meet the Nyquist criteria, they are the highest resolution 4/3″ lenses currently available from Navitar. They can be used with this camera, with the awareness that lenses of higher optical resolution – if available – could provide a higher optical resolution for the overall system, at a price that is likely to be higher. Please check out our Knowledge Base Article for more details.

Highlighted row colors identify lenses with different optical formats: Light-green = 4/3″ lenses (no vignetting); Beige = 1.1″ lenses (some vignetting is possible). See explanation above, and in our Knowledge Base article titled Camera Lens Fundamentals.

Notes:
The working distance (WD) is defined as the distance from the object plane to the front of the lens.
The above are theoretical estimates provided for reference, and are not a guarantee of performance. Actual FOVs and optical resolution are best determined by experiment.
The FOVs and smallest resolvable feature sizes are estimated with the object plane placed at the minimum WD of the lens. A similar calculation may be performed for longer WDs. Please contact us for assistance: our specialists can help you identify a lens that meets your FOV requirements at a Working Distance that is convenient for your workflow.
Increasing the WD will result in larger FOVs, and lower optical resolution (an increase in the smallest resolvable feature size).
(*) The system meets Nyquist criteria if the optical resolution at the center of the lens (in lp/mm) is ≥ the pixel-size limited resolution (see above).
(**) The minimum resolvable feature size is estimated based on whether the lens meets the Nyquist criterion. If the Nyquist limit is met, then the resolution of the system is the estimated to be the distance on the sample plane that corresponds to two pixels in the image plane. If not, it is estimated based on the limiting resolution of the lens.

Please complete this form to gain site-wide access to Product Documents.

"*" indicates required fields

Hidden
Hidden
This field is for validation purposes and should be left unchanged.

Cage Code: 9LW84UEI: P95ZTNC5JR98