(800) 640-1320

Scientific Imaging, Inc.

Imaging Solutions for Science and Industry

Home > Products > CMOS Camera Selection > 2.2MP CMOSIS Imager Based Camera
pl_combo
pl_board
pl_trigger

2.2MP CMOSIS Imager Based Camera

Features

  • Imager Series: CMOSIS CMV2000
  • 2.2 MP: 2048 x 1088 at up to 170 f/sec
  • Global Shutter
  • 2/3″ Image Sensor Optical Format
  • Monochrome or Color or NIR
  • Pixel Size: 5.5μm x 5.5μm
  • Well suited for NIR imaging
  • Supports Hardware and Software Triggering
  • Host Interface and Power: USB3.0
  • C-Mount compatible: add a Camera Lens or a Zoomable or Fixed Microscope/Macroscope
  • Includes Software for Camera Control and Image Acquisition
  • Supported by a Full-featured SDK
  • 3rd Party Software support: LabVIEW, Matlab, Micro-Manager

Typical Applications:

  • Microscopy: NIR
  • Materials Sciences and Physical Sciences
  • Inspection, Metrology and Quality Control

Product Documents

Camera Docs

+ My Quote

This series of cameras is based on a CMOSIS CMV2000 imager sensor. These 2.2 MPix image sensors are offered in a choice of monochrome/color/NIR options. The NIR version has high sensitivity in the 700-1000 nm spectral range and is therefore a good choice for NIR imaging applications. CMOSIS’s Global Shutter technology ensures that all pixels begin and end exposure simultaneously. This is particularly useful in imaging conditions in which the field of view changes rapidly, either due to fast motion or due to rapid changes in light intensity.

Host Interface: USB3.0

Color Space Options:

  • Monochrome
  • RGB Color

Configuration Options:

  • Enclosed: this is the standard configuration, in which the camera electronics are enclosed in an enclosure.
  • Board Level: in this configuration, a c-mount adapter is installed, but the camera enclosure is omitted. The user accepts all responsibilities related to using exposed, unshielded electronic circuits.

Camera Series PL-D732MU-NIR PL-D732MU PL-D732CU
CMOS Sensor Technology CMOSIS
Image Sensor series CMV2000
Spectral Option Monochrome (NIR) Monochrome Color
#pixels (MP) 2.2
#pixels (H x V) 2048 x 1088
Max. Frame Rate (fps) 170
Pixel Size (µm) 5.50
Shutter Type Global
Imager Dimensions: H x V (mm) 11.3 x 6
Diagonal (mm) 12.80
(*) Peak QE (% @ λ nm) See Monochrome/NIR Graph 63% @ 525nm See RGB Graph
(*) Read Noise (e-) 13
(*) Full Well Capacity (Ke-) 13.5
(*) Dark Current at 25°C (e-/p/s) 125
Bit Depth 8 or 10
Interface USB3.0
TE Cooled No
Lens Mount C,S,CS
Optical Format (for lens selection) 2/3"
(*) these are for reference only, and are not specifications provided by the manufacturer. Please contact us to discuss the photonics requirements of your application.
  • Use your mouse to read QE data at wavelengths of interest.
  • Right-click and drag to zoom-in along the X-axis to expand the view for a desired range of wavelength.
  • To pan left or right within a zoomed-in view, hold down the Shift key and use your mouse.
  • To revert from a zoomed-in view to a normal view, click on the “Reset zoom” button that is displayed at the top-RHS of the graph.


A 1mm thick BK7 clear glass window is installed on monochrome camera models manufactured by Pixelink: this is in addition to the glass faceplate on the image sensor itself. The transmittance of the clear glass window between 365nm – 1100nm is greater than 99.3%, but it falls sharply below 365nm. The QE values shown below 365nm are not meant to indicate that standard versions of these monochrome cameras have spectral responsivity outside the transmittance range of the glass window.

The glass faceplate may cause thin-film interference fringe patterns in coherent-light imaging applications, such as laser beam profiling or interferometry. In such applications all glass (including the glass faceplate on the image sensor) must be removed. Please contact us with these special requests.


An NIR-blocking filter is installed on RGB color camera models. These filters transmit light between 380nm – 648nm, and significantly attenuate light that is outside that range. The need for an NIR-blocking filter in color cameras is explained in our Knowledge Base article titled Quantum Efficiency and Spectral Responsivity. For specifications of the NIR-blocking filter that installed on RGB color camera models from Pixelink, please refer to the article titled Spectrum of IR cut glass used by Pixelink.

All QE values on this website are the best estimates available from various sources, and not necessarily from the manufacturer of the specific image sensor or from the manufacturer of the cameras in our Product Showcase. They represent the best estimates for the imagers by themselves, with the caveat that glass and other optics in the imaging path can significantly impact the spectral sensitivity of an imaging system.

As described on our Knowledge Base article on this subject, these values exist in a range. Therefore no absolute precision is implied, even when QE values are shown to two decimal places! These values and graphs are intended to be used for reference can be use for making useful comparisons between cameras. They are not intended to be a specification or a performance guarantee.

Using the method described in our Knowledge Base Article titled “How Diffraction Limits the Optical Resolution of a Microscope” one can estimate the performance of this camera when used in a microscope with commercially available microscope objectives. In the table below, it is assumed that the microscope is comprised of the objective and a tube lens with the correct focal length for the objective such that the nominal optical magnification of the microscope is the value that is specified for the objective.

Camera Parameters
Optical Format #Megapixels #H pixels #V pixels Pixel size (μm) H size (mm) V size (mm) Diagonal (mm)
2/3" 2.2MP 2048 1088 5.5 11.26 5.98 12.75
Commercially Available Objectives
Objective: Mag/NA 1X\0.03NA 2X\0.1NA 4X\0.13NA 10X\0.26NA 20X\0.5NA 40X\0.75NA 60X\0.85NA 100X\1.4NA
Min. feature size (um) 11.18 3.36 2.58 1.29 0.67 0.45 0.39 0.24
Max pix size (um) 5.59 3.36 5.16 6.45 6.70 9.00 11.70 12.00
FN (mm) 22 22 22 22 22 22 22 22
WD (mm) 8 56.3 17.2 16 2.1 16 0.66 0.31-0.4
NA 0.03 0.1 0.13 0.26 0.5 0.75 0.85 1.4
Magnification 1 2 4 10 20 40 60 100
Estimated Performance of Camera and Objective Combinations
(*) Limiting Resolution (µm) 11.18 5.5 2.75 1.29 0.67 0.45 0.39 0.24
Vignetting? No No No No No No No No
FOV (H x V) mm 11.26 x 5.98 5.63 x 2.99 2.82 x 1.5 1.13 x 0.6 0.56 x 0.3 0.28 x 0.15 0.19 x 0.1 0.11 x 0.06
FOV (diagonal) mm 12.75 6.38 3.19 1.28 0.64 0.32 0.21 0.13
Please contact our imaging experts for assistance in selecting a camera & objective combination that fulfils your FOV & resolution requirements at application-specific wavelengths.
1) The minimum feature size is estimated using the Rayleigh Criteria at λ = 550nm; it can be re-calculated for other wavelengths. R = 1.22*λ/(2NA)
2) The maximum pixel size is estimated by applying the Nyquist criteria to the minimum feature size as it appears on the imager plane. Maximum pixel size = R*magnification/2
3) Camera and Objective combinations which meet the Nyquist criteria and are therefore diffraction limited are indicated by showing the Limiting Resolution in green font. (*)
4) Values for Working Distance (WD) and Field Number (FN) are shown for reference only. Actual values may vary.
5) Vignetting, a darkening of the image at the corners, may be observed if the Imager Diagonal is larger than the Field Number of the Objective.

Camera P/N [Image Sensor], Interface 2/3" format #H pixels #V pixels Pixel size (μm) H size (mm) V size (mm) Diagonal (mm)
PL-D732 [CMOSIS CMV2000], USB3.0 2.2MP@170f/sec 2048 1088 5.5 11.26 5.98 12.75
In applications that require the best achievable optical resolution, it is desirable to use a lens with an optical resolution ≥ 91 lp/mm for an image sensor with a pixel size of 5.5μm. This will ensure that the optical resolution of the camera & lens combination is Nyquist-limited by the pixel-size of the camera, and not by the quality of the lens.

The 1-1955x and 1-2483x series of lenses (highlighted in gold and pink respectively on the table below) have a high optical resolution of 200 and 160 lp/mm (center), which exceeds the 91 lp/mm Nyquist limit of 5.5μm pixels of this camera. These lenses exceed the Nyquist limit at the edge of the lens as well so one may use with this camera in applications which require uncompromising optical resolution. However, in the context of the larger 5.5μm pixels of this camera, and the availability of less-expensive NMV series lenses that also exceed the Nyquist limit, these lenses may seem like “overkill”. The limiting resolution for the camera and lens system (shown in the table below as the minimum resolvable feature) for a combination of this camera and any of the lenses that meet the Nyquist criteria would not be set by the lens, but by the camera (which is the preferred case).

Also shown on the table below are the DO-xx95 series of f/0.95 “fast” lenses (highlighted in light-blue). These lenses are optimized for light-collection, although their optical resolution is considerably lower than that of the 1-1955x & 1-2442x series of lenses, and nearly equal to the 91 lp/mm Nyquist limit of this camera. The NMV series are good, cost-effective lenses whose resolution is a good match to this camera. Please check out our Knowledge Base Article for more details.

Highlighted row colors identify specific type of lenses: Gold = Highest Resolution lenses; Light-pink = High Resolution lenses; Light-blue = Fast lenses; Yellow = Zoom lens; Light-green: Ruggedized lenses.

Notes:
The working distance (WD) is defined as the distance from the object plane to the front of the lens.
The above are theoretical estimates provided for reference, and are not a guarantee of performance. Actual FOVs and optical resolution are best determined by experiment.
The FOVs and smallest resolvable feature sizes are estimated with the object plane placed at the minimum WD of the lens. A similar calculation may be performed for longer WDs. Please contact us for assistance: our specialists can help you identify a lens that meets your FOV requirements at a Working Distance that is convenient for your workflow.
Increasing the WD will result in larger FOVs, and lower optical resolution (an increase in the smallest resolvable feature size).
(*) The system meets Nyquist criteria if the optical resolution at the center of the lens (in lp/mm) is ≥ the pixel-size limited resolution (see above).
(**) The minimum resolvable feature size is estimated based on whether the lens meets the Nyquist criterion. If the Nyquist limit is met, then the resolution of the system is the estimated to be the distance on the sample plane that corresponds to two pixels in the image plane. If not, it is estimated based on the limiting resolution of the lens.

Please complete this form to gain site-wide access to Product Documents.

"*" indicates required fields

Hidden
Hidden
This field is for validation purposes and should be left unchanged.

Cage Code: 9LW84UEI: P95ZTNC5JR98